Reliable Rotary Electric Actuator
Standard Group 11 modulating drives (control option 9) are equipped with Beck’s Digital Control Module (DCM), which controls the position of the drive according to the input signal it receives. A position feedback signal is delivered to the DCM from the position sensing device (Beck’s Contactless Position Sensor (CPS)
Available Torque And Timing Combinations For The Model 11-150 series
(LB-FT)
(SECONDS/100°)
HOW TO ORDER
Beck Group 11 drives are available in five basic models, and are furnished with a crank arm and rod end for linkage connection. When the drive is to be used in a multi-revolution mode, a sheave is furnished instead of a crank arm for use with wire rope. The following instructions are intended to make it easy to specify and order Beck Group 11 drives. If questions arise concerning additional options or control modes, contact your Beck Sales Engineer.
Complete instruction manuals are furnished with each drive order.
- Basic model number
- Control option
- Torque (lb-ft)
- Timing (sec./100°)
- Number of auxiliary switches
Using the information above, fill out the full model number according to the following formula:
- Desired control input signal
- Desired power (120 or 240 V, 60 or 50 Hz)
- Direction of rotation desired on increasing signal: Clockwise (CW) or
- Counterclockwise (CCW)
- Desired optional control features
11 Terry Drive
Newtown, PA 18940 USA
